Get The Pdf FileGet The Pdf File
76 Competition 110 Racing Gasoline is a high octane, high quality leaded fuel designed exclusively for racing applications at sanctioned racing events. It has an octane rating (AKI) of 110 and a Motor Octane Number (MON)of 106 .It is an approved fuel for competition by all major sanctioning bodies.
76 Competion 110 Racing Gasoline is the "Official Fuel Of NASCAR",and has been for over 45 years . It has been tested in engines with compression ratios up to 16 to 1 operating at 6,000 to 9,000 rpm .
76 Competion 110 Racing Gasoline is formulated from high octane gasoline blend stock and selected additives. It is highly resistant to detonation under high speed , high output conditions . Its low vapor pressure quality provides protection against vapor lock. Mid- range volatility is carefully controlled to give excellent throttle response and acceleration . The composition of this fuel is carefully controlled to deliver consistent , reproducible quality ,allowing precise engine tuning for maximum performance on the track .
76 Competition 110 Racing Gasoline burns cleanly , leaving little or no deposits, Allowing maximum engine power.A phosphorus additive controls surface ignition . The high quality stocks used in this gasoline make it very stable and resistant to gum formation. This assures cleaner carburetors , intake manifolds , and valves. A detergent additive further helps to keep carburetors clean. Antioxidants and corrosion inhibitors promote stability and longer shelf life. This gasoline does not contain any alcohols or oxygenates .
All race car events where gasoline is used as a fuel.
Gasoline - fuel race vehicles such as :
CAUTION : FOR OFF-HIGHWAY USE AT SANCTIONED RACING EVENTS ONLY
OUTSTANDING FEATURES
(¹) Note : 76 Competion 110 Racing Gasoline should be stored in a cool place in metal containers only . It contains components that are sensitive to sunlight.Plastic jugs , especially clear plastic jugs , are notacceptable for storage.
TYPICAL INSPECTION TESTS :
| Product Code | 00290 |
| Density ; g/cm³ @ 15ºC (60ºF) | 0.728 |
| Gravity ; º API | 63 |
| Color | Red |
| Octane Number , AKI , (R+M) /2 | 110 |
| Octane Number Motor | 106 |
| Octane Number , Research | 115 |
| Octane Number , Road | n/a |
| Reid Vapor Pressure , psi | 6.5 |
| Temperature @ V/L = 6 , ºC (ºF) | 63 (145) |
| Distillation , ºC (ºF) @ % Evap. | |
| Initial Boiling Point | 36 (96) |
| 10 | 67(152) |
| 50 | 102 (216) |
| 90 | 108 (226) |
| End Point | 135 (275) |
| Copper Corrosion , ASTM D130 | 1A |
| Doctor Test , ASTM D4952 | Negative |
| Existent Gum , ASTM D381 , mg/100 ml | 1.0 |
| Oxidation Stability , ASTM D525 , minutes | 1,440+ |
| Lead , g/gal | <4.0 |
| Sulfur , wt % | 0 |
| Viscosity , cSt @ 16ºC (60ºF) | 0.7 |
MEETS REQUIREMENTS :